Category: Carpets

General Info:
Be sure to check the helpful hints for the Do’s and Don’ts of stain removal and Six Sure Ways to Set Stains.

Tools & Chemicals:
Dish washing or fine fabric detergent, white terry towels, white vinegar, warm water, measuring cup, spoon, vacuum.

Technique:

• Work on removing the stain as soon as you notice it. The longer the stain is left on the carpet the greater the chances are of the stain setting.
• In every case remove all excess wet or dry material before attempting to clean. Blot wet materials using a white terry towel (check helpful hints for a detailed description of blotting). Vacuum excess dry materials or gently scrape up materials with a spoon.
• Mix 1/2 tsp. of dish washing soap or fine fabric detergent into 1 (8 oz.)cup of warm water.
• Apply a small amount, blot or tamp and repeat until the stain is removed. Be patient. Complete removal may reqiure repeating the same step several times. Tamp down on the carpet, do not scrub as this may disort the texture of the pile.
• Cover the stain with the towel and press down repeatedly to absorb the stain material and detergent.
• Once the stain is completely removed, rinse the area with cold water; blot with a dry white terry towel until all moisture is removed. Repeat this process several times to remove cleaning solution residue. (Residue can attract soils).
• If the spot or stain turns brownish when dry, mix 1 part white vinegar and two parts water. Apply a small amount and blot. Repeat only once.

Precautions:
Never use a stronger concentration than is recommended. Never laundry detergent or automatic dish washing detergents because they may destroy or dye some fibers.

General Info:
Be sure to check the helpful hints for the Do’s and Don’ts of stain removal and Six Sure Ways to Set Stains.

Tools & Chemicals:
Dry cleaning solvent,dish washing or fine fabric detergent, white terry towels, white vinegar, warm water, measuring cup, vacuum. Dry cleaning solvents can be purchased at your grogery store or at your local carpet cleaning supply retailer.

Technique:

• Work on removing the stain as soon as you notice it. The longer the stain is left on the carpet the greater the chances are of the stain setting.
• In every case remove all excess wet or dry material before attempting to clean. Blot wet materials using a white terry towel (check helpful hints for a detailed description of blotting). Vacuum excess dry materials or gently scrape up materials with a spoon.
• Apply a small amount of dry cleaning solvent to the white terry towel and blot the stain. Continue until no further transfer of material to the towel is apparent.
• If the stian remains proceed to the next step.
• Mix 1/2 tsp. of dish washing soap or fine fabric detergent into 1 (8 oz.)cup of warm water.
• Apply a small amount, blot or tamp and repeat until the stain is removed. Be patient. Complete removal may require repeating the same step several times. Tamp down on the carpet, do not scrub as this may disort the texture of the pile.
• Cover the stain with the towel and press down repeatedly to absorb the stain material and detergent.
• Once the stain is completely removed, rinse the area with cold water; blot with a dry white terry towel until all moisture is removed. Repeat this process several times to remove cleaning solution residue. (Residue can attract soils).
• If the spot or stain turns brownish when dry, mix 1 part white vinegar and two parts water. Apply a small amount and blot. Repeat only once.

Precautions:
Never use a stronger concentration than is recommended. Never use laundry detergent or automatic dish washing detergents because they may destroy or dye some fibers. Never use non-volatile solvents as they can cause delamination in synthetic carpets either immediately or over a period of time. Non-volatile solvents do not dissipate at room temperture & will remain in your carpet. Never pour solvents directly onto your carpet or saturate your carpet. Instead apply the solvent to a white terry towel and blot the stained area. Never use highly combustible solvents such as gasoline or paint thinners.

General Info:
Be sure to check the helpful hints for the Do’s and Don’ts of stain removal and Six Sure Ways to Set Stains.

Tools & Chemicals:
Dry cleaning solvent,dish washing or fine fabric detergent, white terry towels, white vinegar, warm water, measuring cup, vacuum. Dry cleaning solvents can be purchased at your grogery store or at your local carpet cleaning supply retailer.

Technique:

• Work on removing the stain as soon as you notice it. The longer the stain is left on the carpet the greater the chances are of the stain setting.
• In every case remove all excess wet or dry material before attempting to clean. Blot wet materials using a white terry towel (check helpful hints for a detailed description of blotting). Vacuum excess dry materials or gently scrape up materials with a spoon.
• Apply a small amount of dry cleaning solvent to the white terry towel and blot the stain. Continue until no further transfer of material to the towel is apparent.
• If the stain remains proceed to the next step.
• Mix 1/2 tsp. of dish washing soap or fine fabric detergent into 1 (8 oz.)cup of warm water.
• Apply a small amount, blot or tamp and repeat until the stain is removed. Be patient. Complete removal may require repeating the same step several times. Tamp down on the carpet, do not scrub as this may distort the texture of the pile.
• Cover the stain with the towel and press down repeatedly to absorb the stain material and detergent.
• Once the stain is completely removed, rinse the area with cold water; blot with a dry white terry towel until all moisture is removed. Repeat this process several times to remove cleaning solution residue. (Residue can attract soils).
• If the spot or stain turns brownish when dry, mix 1 part white vinegar and two parts water. Apply a small amount and blot. Repeat only once.

Precautions:
Never use a stronger concentration than is recommended.
Never use laundry detergent or automatic dish washing detergents because they may destroy or dye some fibers.
Never use non-volatile solvents as they can cause delamination in synthetic carpets either immediately or over a period of time. Non-volatile solvents do not dissipate at room temperture & will remain in your carpet.
Never pour solvents directly onto your carpet or saturate your carpet. Instead apply the solvent to a white terry towel and blot the stained area.
Never use highly combustible solvents such as gasoline or paint thinners.

General Info:
Be sure to check the helpful hints for the Do’s and Don’ts of stain removal and Six Sure Ways to Set Stains.

Tools & Chemicals:
Dry cleaning solvent,dish washing or fine fabric detergent, white terry towels, white vinegar, warm water, measuring cup, vacuum. Dry cleaning solvents can be purchased at your grogery store or at your local carpet cleaning supply retailer.

Technique:

• Work on removing the stain as soon as you notice it. The longer the stain is left on the carpet the greater the chances are of the stain setting.
• In every case remove all excess wet or dry material before attempting to clean. Blot wet materials using a white terry towel (check helpful hints for a detailed description of blotting). Vacuum excess dry materials or gently scrape up materials with a spoon.
• Apply a small amount of dry cleaning solvent to the white terry towel and blot the stain. Continue until no further transfer of material to the towel is apparent.
• If the stian remains proceed to the next step.
• Mix 1/2 tsp. of dish washing soap or fine fabric detergent into 1 (8 oz.)cup of warm water.
• Apply a small amount, blot or tamp and repeat until the stain is removed. Be patient. Complete removal may require repeating the same step several times. Tamp down on the carpet, do not scrub as this may disort the texture of the pile.
• Cover the stain with the towel and press down repeatedly to absorb the stain material and detergent.
• Once the stain is completely removed, rinse the area with cold water; blot with a dry white terry towel until all moisture is removed. Repeat this process several times to remove cleaning solution residue. (Residue can attract soils).
• If the spot or stain turns brownish when dry, mix 1 part white vinegar and two parts water. Apply a small amount and blot. Repeat only once.

Precautions:
Never use a stronger concentration than is recommended. Never use laundry detergent or automatic dish washing detergents because they may destroy or dye some fibers. Never use non-volatile solvents as they can cause delamination in synthetic carpets either immediately or over a period of time. Non-volatile solvents do not dissipate at room temperture & will remain in your carpet. Never pour solvents directly onto your carpet or saturate your carpet. Instead apply the solvent to a white terry towel and blot the stained area. Never use highly combustible solvents such as gasoline or paint thinners.

Jennifer asks;

Someone tracked gum onto a Natural Fibre Carpet with vegetable dye, how can we romve it?

You are wise not to use any cleaning compounds that are water based. Water based cleaning compounds used on some natural fibre vegetable dyed carpet can cause the dyes to run. If the water based cleaning compound is not neutral pH or close to neutral pH you also run the risk of alkaline browning or damaging the carpet with acid spotters, which may not be reversible.

Depending on where you are in the world, you should be able to get dry cleaning solvent from a grocery store, hardware store or carpet cleaning supplies store. Put a small amount on a white terry towel and lightly blot onto the carpet. Be patient the gum will destabilize and move from the fibre, Dry cleaning solvent will 100% dissipate and leaves no residue.

Do not use ice cubes or other freezers on natural fibre carpet as freezing the carpet made cause the fibres to break.

Good luck

General Info:
Be sure to check the helpful hints for the Do’s and Don’ts of stain removal and Six Sure Ways to Set Stains.

Tools & Chemicals:
Dry cleaning solvent,dish washing or fine fabric detergent, white terry towels, white vinegar, warm water, measuring cup, vacuum. Dry cleaning solvents can be purchased at your grogery store or at your local carpet cleaning supply retailer.

Technique:

• Work on removing the stain as soon as you notice it. The longer the stain is left on the carpet the greater the chances are of the stain setting.
• In every case remove all excess wet or dry material before attempting to clean. Blot wet materials using a white terry towel (check helpful hints for a detailed description of blotting). Vacuum excess dry materials or gently scrape up materials with a spoon.
• Apply a small amount of dry cleaning solvent to the white terry towel and blot the stain. Continue until no further transfer of material to the towel is apparent.
• If the stian remains proceed to the next step.
• Mix 1/2 tsp. of dish washing soap or fine fabric detergent into 1 (8 oz.)cup of warm water.
• Apply a small amount, blot or tamp and repeat until the stain is removed. Be patient. Complete removal may require repeating the same step several times. Tamp down on the carpet, do not scrub as this may disort the texture of the pile.
• Cover the stain with the towel and press down repeatedly to absorb the stain material and detergent.
• Once the stain is completely removed, rinse the area with cold water; blot with a dry white terry towel until all moisture is removed. Repeat this process several times to remove cleaning solution residue. (Residue can attract soils).
• If the spot or stain turns brownish when dry, mix 1 part white vinegar and two parts water. Apply a small amount and blot. Repeat only once.

Precautions:
Never use a stronger concentration than is recommended. Never use laundry detergent or automatic dish washing detergents because they may destroy or dye some fibers. Never use non-volatile solvents as they can cause delamination in synthetic carpets either immediately or over a period of time. Non-volatile solvents do not dissipate at room temperture & will remain in your carpet. Never pour solvents directly onto your carpet or saturate your carpet. Instead apply the solvent to a white terry towel and blot the stained area. Never use highly combustible solvents such as gasoline or paint thinners.

General Info:
Be sure to check the helpful hints for the Do’s and Don’ts of stain removal and Six Sure Ways to Set Stains.

Tools & Chemicals:
Dry cleaning solvent,dish washing or fine fabric detergent, white terry towels, white vinegar, warm water, measuring cup, vacuum. Dry cleaning solvents can be purchased at your grogery store or at your local carpet cleaning supply retailer.

Technique:

• Work on removing the stain as soon as you notice it. The longer the stain is left on the carpet the greater the chances are of the stain setting.
• In every case remove all excess wet or dry material before attempting to clean. Blot wet materials using a white terry towel (check helpful hints for a detailed description of blotting). Vacuum excess dry materials or gently scrape up materials with a spoon.
• Apply a small amount of dry cleaning solvent to the white terry towel and blot the stain. Continue until no further transfer of material to the towel is apparent.
• If the stian remains proceed to the next step.
• Mix 1/2 tsp. of dish washing soap or fine fabric detergent into 1 (8 oz.)cup of warm water.
• Apply a small amount, blot or tamp and repeat until the stain is removed. Be patient. Complete removal may require repeating the same step several times. Tamp down on the carpet, do not scrub as this may disort the texture of the pile.
• Cover the stain with the towel and press down repeatedly to absorb the stain material and detergent.
• Once the stain is completely removed, rinse the area with cold water; blot with a dry white terry towel until all moisture is removed. Repeat this process several times to remove cleaning solution residue. (Residue can attract soils).
• If the spot or stain turns brownish when dry, mix 1 part white vinegar and two parts water. Apply a small amount and blot. Repeat only once.

Precautions:
Never use a stronger concentration than is recommended. Never use laundry detergent or automatic dish washing detergents because they may destroy or dye some fibers. Never use non-volatile solvents as they can cause delamination in synthetic carpets either immediately or over a period of time. Non-volatile solvents do not dissipate at room temperture & will remain in your carpet. Never pour solvents directly onto your carpet or saturate your carpet. Instead apply the solvent to a white terry towel and blot the stained area. Never use highly combustible solvents such as gasoline or paint thinners.

General Info:
Be sure to check the helpful hints for the Do’s and Don’ts of stain removal and Six Sure Ways to Set Stains.

Tools & Chemicals:
Dry cleaning solvent,dish washing or fine fabric detergent, white terry towels, white vinegar, warm water, measuring cup, vacuum. Dry cleaning solvents can be purchased at your grogery store or at your local carpet cleaning supply retailer.

Technique:

• Work on removing the stain as soon as you notice it. The longer the stain is left on the carpet the greater the chances are of the stain setting.
• In every case remove all excess wet or dry material before attempting to clean. Blot wet materials using a white terry towel (check helpful hints for a detailed description of blotting). Vacuum excess dry materials or gently scrape up materials with a spoon.
• Apply a small amount of dry cleaning solvent to the white terry towel and blot the stain. Continue until no further transfer of material to the towel is apparent.
• If the stian remains proceed to the next step.
• Mix 1/2 tsp. of dish washing soap or fine fabric detergent into 1 (8 oz.)cup of warm water.
• Apply a small amount, blot or tamp and repeat until the stain is removed. Be patient. Complete removal may require repeating the same step several times. Tamp down on the carpet, do not scrub as this may disort the texture of the pile.
• Cover the stain with the towel and press down repeatedly to absorb the stain material and detergent.
• Once the stain is completely removed, rinse the area with cold water; blot with a dry white terry towel until all moisture is removed. Repeat this process several times to remove cleaning solution residue. (Residue can attract soils).
• If the spot or stain turns brownish when dry, mix 1 part white vinegar and two parts water. Apply a small amount and blot. Repeat only once.

Precautions:
Never use a stronger concentration than is recommended. Never use laundry detergent or automatic dish washing detergents because they may destroy or dye some fibers. Never use non-volatile solvents as they can cause delamination in synthetic carpets either immediately or over a period of time. Non-volatile solvents do not dissipate at room temperture & will remain in your carpet. Never pour solvents directly onto your carpet or saturate your carpet. Instead apply the solvent to a white terry towel and blot the stained area. Never use highly combustible solvents such as gasoline or paint thinners.

General Info:
Play Doh is a popular toy for kids, however often more of it ends up in the carpet than in the cans. Be sure to check the helpful hints for the Do’s and Don’ts of stain removal and Six Sure Ways to Set Stains.

Tools & Chemicals:
Dry cleaning solvent,dish washing or fine fabric detergent, white terry towels, white vinegar, warm water, measuring cup, vacuum. Dry cleaning solvents can be purchased at your grogery store or at your local carpet cleaning supply retailer.

Technique:

• Work on removing the stain as soon as you notice it. The longer the stain is left on the carpet the greater the chances are of the stain setting.
• In every case remove all excess wet or dry material before attempting to clean. Blot wet materials using a white terry towel (check helpful hints for a detailed description of blotting). Vacuum excess dry materials or gently scrape up materials with a spoon.
• Apply a small amount of dry cleaning solvent to the white terry towel and blot the stain. Continue until no further transfer of material to the towel is apparent.
• If the stian remains proceed to the next step.
• Mix 1/2 tsp. of dish washing soap or fine fabric detergent into 1 (8 oz.)cup of warm water.
• Apply a small amount, blot or tamp and repeat until the stain is removed. Be patient. Complete removal may require repeating the same step several times. Tamp down on the carpet, do not scrub as this may disort the texture of the pile.
• Cover the stain with the towel and press down repeatedly to absorb the stain material and detergent.
• Once the stain is completely removed, rinse the area with cold water; blot with a dry white terry towel until all moisture is removed. Repeat this process several times to remove cleaning solution residue. (Residue can attract soils).
• If the spot or stain turns brownish when dry, mix 1 part white vinegar and two parts water. Apply a small amount and blot. Repeat only once.

Precautions:
Never use a stronger concentration than is recommended. Never use laundry detergent or automatic dish washing detergents because they may destroy or dye some fibers. Never use non-volatile solvents as they can cause delamination in synthetic carpets either immediately or over a period of time. Non-volatile solvents do not dissipate at room temperture & will remain in your carpet. Never pour solvents directly onto your carpet or saturate your carpet. Instead apply the solvent to a white terry towel and blot the stained area. Never use highly combustible solvents such as gasoline or paint thinners.

General Info:
Be sure to check the helpful hints for the Do’s and Don’ts of stain removal and Six Sure Ways to Set Stains.

Tools & Chemicals:
Acetone,Dry cleaning solvent,dish washing or fine fabric detergent, white terry towels, white vinegar, warm water, measuring cup, vacuum.

Technique:

• Work on removing the stain as soon as you notice it. The longer the stain is left on the carpet the greater the chances are of the stain setting.
• In every case remove all excess wet or dry material before attempting to clean. Blot wet materials using a white terry towel (check helpful hints for a detailed description of blotting). Vacuum excess dry materials or gently scrape up materials with a spoon.
• Apply a small amount of acetone to the white terry towel and blot the stain. Continue until no further transfer of material to the towel is apparent.
• If the stain remains proceed to the next step.
• Apply a small amount of dry cleaning solvent to the white terry towel and blot the stain. Continue until no further transfer of material to the towel is apparent.
• If the stain remains proceed to the next step.
• Mix 1/2 tsp. of dish washing soap or fine fabric detergent into 1 (8 oz.)cup of warm water.
• Apply a small amount, blot or tamp and repeat until the stain is removed. Be patient. Complete removal may require repeating the same step several times. Tamp down on the carpet, do not scrub as this may distort the texture of the pile.
• Cover the stain with the towel and press down repeatedly to absorb the stain material and detergent.
• Once the stain is completely removed, rinse the area with cold water; blot with a dry white terry towel until all moisture is removed. Repeat this process several times to remove cleaning solution residue. (Residue can attract soils).
• If the spot or stain turns brownish when dry, mix 1 part white vinegar and two parts water. Apply a small amount and blot. Repeat only once.

Precautions:
Never use a stronger concentration than is recommended. Never use laundry detergent or automatic dish washing detergents because they may destroy or dye some fibers. Never use non-volatile solvents as they can cause delamination in synthetic carpets either immediately or over a period of time. Non-volatile solvents do not dissipate at room temperture & will remain in your carpet. Never pour solvents directly onto your carpet or saturate your carpet. Instead apply the solvent to a white terry towel and blot the stained area. Never use highly combustible solvents such as gasoline or paint thinners.